Fakir CL 220 Dry Type Instruction Manual page 32

GB
OPERATION
b) Setting the Suction Power
You can adjust the suction power to suit the type of floor being
cleaned. Use the symbols on the suction power display as a
guideline (Fig. 14/1)
Curtains, textiles (lowest setting)
∑ Upholstery, cushions
∑ High-class carpets, rugs and runners
Slightly soiled carpets and hard floors
∑ Heavily soiled carpets and hard floors with coarse dirt
Fig. 14
(highest setting)
You can increase the suction power by using the "-"
(Fig. 10/2) or decrease by using the "+" (Fig. 10/3) buttons.
c) Switching Off and Retracting Power Cord
1) Switch off the vacuum cleaner with the on/off switch
(Fig. 15/1) and pull the plug from the mains socket.
2) Keep the plug in your hand.
Fig. 15
3) To retract the power cord, push the cord retracting button
(Fig. 15/2)
d) Transport and Storage
To transport the vacuum cleaner you can carry it by the handle.
You can hook the park/storage hook into the parking bracket
(Fig. 16/2) or the storage bracket (Fig. 17/2) to store the vacuum
cleaner.
If you want to store the appliance for a prolonged period, remove
the dust filter bag and dispose of it properly. Also clean the
Fig. 16
filters.
Always store the appliance in a cool, dry place.
Keep the appliance away from the hot places (next to
radiator or oven etc.) Do not keep it directly under the
sunlight. Hot places may harm the appliance
Fig. 17
ATTENTION!