Toyota Auris 2013 Owner's Manual page 135

 Hybrid System Indicator (hybrid model)
Charge area
1
Shows regenerative charging.
Hybrid Eco area
2
Shows that the vehicle is driven in a
condition that promotes frequent motor-
only operation. (When the vehicle is
operating low driving load, such as
when driving slowly, using hybrid Eco
area leads Eco-friendly driving.)
Eco area
3
Shows that the vehicle is being driven in
an Eco-friendly manner.
Power area
4
Shows the driving power is more than
the upper limit of Eco driving.
 By keeping the indicator needle within Eco area, more Eco-friendly driving
can be achieved.
 Charge area indicates regeneration* status. Regenerated energy will be
used to charge the battery.
*: When used in this manual, "regeneration" refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
The meters and display illuminate when

Except hybrid model (vehicles without a smart entry & start system)

The engine switch is in the "ON" position.
Except hybrid model (vehicles with a smart entry & start system)

The engine switch is in IGNITION ON mode.
Hybrid model

The power switch is in ON mode.
UK_AURIS/AURIS_HV_EE (OM12F76E)
2. Instrument cluster
135
2