Elo Paypoint Register Care And Handling; Printer Maintenance - Elo Touch Solutions ESY13P1 User Manual

Elo PayPoint Register Care and Handling

The following tips will help maintain optimal performance of your Elo PayPoint Register:
Disconnect the power cable before cleaning.
To clean the unit (except for touch screen), use a soft cotton or microfiber cloth lightly
dampened with a mild detergent.
It is important that your unit remains dry. Do not get liquids on or inside the unit. In the
event that liquid does get inside, have a qualified service technician inspect the unit
before you power it on again.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
When cleaning the touchscreen, use window or glass cleaner applied to a clean cloth.
Never apply the cleaner directly on the touchscreen. Do not use alcohol (methyl, ethyl or
isopropyl), thinner, benzene, or other abrasive cleaners.

Printer Maintenance

Changing printer paper
The register receipt printer operates using heat, and not with ink. Printer paper compatible with
the PayPoint receipt printer are as follows:
F230AA Mitsubishi Paper Mill Co., Ltd., or its equivalent is the recommendable thermal paper
for the register receipt printer.
To change the paper for the PayPoint Register receipt printer:
Type:
Paper width:
Paper roll diameter: 50 mm (maximum)
Printing width:
Thermal Paper
58 mm
48 mm
®
User Manual: Elo Paypoint
SW602189 Rev A, Page 17 of 24