Changing The Network Connection To Ethernet From The Control Panel - Epson ET-3750 series User Manual

User's Guide
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Change or re-set the connection method on the Select Software Installation screen, and then click Next.
Changing the Network Connection to Ethernet from
the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
2. Select General Settings > Network Settings > Wired LAN Setup.
3. Press the OK button.
4. Connect the printer to a router using an Ethernet cable.
Network Settings
u d l r
buttons, and then press the OK button.
40