Subscribe to Our Youtube Channel
Related Manuals for HAWK ENTERPRISES HP1513HD
Summary of Contents for HAWK ENTERPRISES HP1513HD
- Page 1 HAWK HD HAWK Floor Machine ENTERPRISES Stripping, Scrubbing, Carpet Care Operation Care Service HAWK ENTERPRISES 2902 Park Six Court, Elkhart, IN 46514 (574) 294-1910 (888) 289-4295 www.hawkenterprises.com...
-
Page 2: Table Of Contents
Clean Up And Storage .....................5 Floor Machine Assemblies ..................6 Floor Machine Parts List ..................7-8 Optional Accessories ....................9 Features ........................9 Limited Warranty ..................Back Cover Machine Specifications Specifica ons Model # HP1513HD HP1515HD HP1517HD HP1520HD Part # F0013 F0006 F0009 F0012... -
Page 3: Service Information
SERVICE INFORMATION Do not allow the machine to be used as a toy. To obtain consistent performance over the life Close attention is necessary when used near of your equipment, read through these instruc- children. Do not leave the machine connected to tions and save them for future reference. -
Page 4: Grounding Instructions
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should mal- function or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord that has an equipment-grounding conductor and grounding plug. -
Page 5: Adjustments
BRUSH AND PAD DRIVER INSTALLATION UNLOCK NOTE: Disconnect the power cord from the electrical outlet before installing a brush or pad LOCK driver. Figure 5 Figure 4 UNLOCK To install a brush or pad driver, leave the handle in the upright position and tip the machine backwards so it rests on its wheels and upper handle section LOCK (Figure 4). -
Page 6: Guidelines For Operation
DO NOT LET THE MACHINE REST ON THE Push forward to disengage safety PAD OR BRUSH FOR AN EXTENDED PERIOD switch lock. OF TIME. This may alter the shape of the pad or brush which may cause the machine to wobble. CORD STORAGE When not in use, loosely wind the power cord around the cord storage hook on the handle shaft and both of... - Page 10 3/15/2016 DETAIL PART STANDARD 175 RPM MACHINES QTY. NUMBER NUMBER DESCRIPTION REQ'D HPW0001 FRAME STD. MACHINE SEE DATA PLATE FOR PROPER BRUSH COVER SIZE KIT3011RED BRUSH COVER 13 INCH W/BLK BUMPER INC IN KIT3011RED BUMPER 13 INCH BLK (C0015-BLK) INC IN KIT3011RED BUSH COVER 13 INCH - RED KIT312RED BRUSH COVER 15 INCH W/BLK BUMPER...
- Page 11 SEE DATA PLATE FOR PROPER MOTOR INFORMATION MOTOR WITH GEARBOX INSTALLED KIT1012BLACK MOTOR 1.5 HP 115/230V 60C W/ 3 IDLER GEARBOX BLACK KIT1012CHROME MOTOR 1.5 HP 115/230V 60C W/ 3 IDLER GEARBOX CHROME KIT1013BLACK MOTOR 1.5 HP W/ XHD GEAR UNIT BLACK KIT1013CHROME MOTOR 1.5 HP W/ XHD GEAR UNIT CHROME GEARBOX ONLY WITH FLANGE INSTALLED...
- Page 12 3/15/2016 STANDARD HANDLE ASSY PART DET. NO: NUMBER DESCRIPION QTY. KIT3011BLK TRIGGER REPLACEMENT KIT 14 INCH BLK INC IN KIT3011BLK TRIGGER 14 INCH - BLACK INC IN KIT3011BLK ROLL PIN INC IN KIT3011BLK SPRING - TRIGGER KIT2011BLK HANDLE GRIP REPLACEMENT KIT INC IN KIT2011BLK HANDLE GRIP - BLK KIT1005...
-
Page 13: Optional Accessories
OPTIONAL ACCESSORIES Model Model Option 17” 1.5 HP 175 RPM 20” 1.5 HP 175 RPM Description A0002 A0003 Polypropylene Brush A0004 A0005 Polish Brush A0006 A0007 Nylon Brush A0008 A0009 Grit Brush A0010 A0011 Pad Driver A0001-NAT4 A0001-NAT Solution Tank Kit A0019 A0019 Clutch Plate (Plastic) -
Page 14: Limited Warranty
If you are unable to locate any of the foregoing, you may write or otherwise communicate with HAWK ENTERPRISES before repair service is performed by anyone else. In such event, HAWK ENTERPRISES will provide either the location or a closely available HAWK distributor service department, or HAWK authorized service station or other factory instructions.
Need help?
Do you have a question about the HP1513HD and is the answer not in the manual?
Questions and answers