Advertisement
Quick Links
SPARTAK ENTERPRISES, INC.
SWIVEL MEDIA TOWER
Model #2380-33OA
LOT #2639
IF PARTS ARE MISSING AND OR DEFECTIVE, IF INSTRUCTIONS ARE NOT CLEAR
OR IF YOU ARE EXPERIENCING PROBLEMS ASSEMBLING OUR PRODUCT.
BEFORE YOU RETURN THE PRODUCT TO THE STORE,
PLEASE CALL US TOLL FREE FOR CUSTOMER SERVICE ASSISTANCE
(888) 777-8250
OR SEND US EMAIL AT
help@spartakent.com
PLEASE HAVE ITEM NUMBER READY, AND A REPRESENTATIVE WILL GLADLY ASSIST YOU
SPARTAK ENTERPRISES, INC. 841 E. FRANCIS STR. ONTARIO, CA. 91761 TEL; 951/360-0610 FAX; 951/360-0775
Advertisement
Related Manuals for venture horizon 2380
Summary of Contents for venture horizon 2380
- Page 1 SPARTAK ENTERPRISES, INC. SWIVEL MEDIA TOWER Model #2380-33OA LOT #2639 IF PARTS ARE MISSING AND OR DEFECTIVE, IF INSTRUCTIONS ARE NOT CLEAR OR IF YOU ARE EXPERIENCING PROBLEMS ASSEMBLING OUR PRODUCT. BEFORE YOU RETURN THE PRODUCT TO THE STORE, PLEASE CALL US TOLL FREE FOR CUSTOMER SERVICE ASSISTANCE...
- Page 2 HARDWARE PART # DESCRIPTION CAMLOCK COVER CAP CCPZXX CAMLOCK CAMLT12 BOLT CAMBT16 BRACKET ANGLE BM25 EURO SCREW SPE610BL SHELF SUPPORT BP--54 SWIVEL PLATE TRNTPL TRNTSC SWIVEL BOLT WOOD DOWEL DOWW830 TOOL REQUIRED PHILLIPS SCREWDRIVER HAMMER...
- Page 3 NOTE: FIRST MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED ON THIS SHEET. IF YOU ARE MISSING ANY PIECE(S), DO NOT ASSEMBLE THE UNIT. INSTEAD, CALL OUR CUSTOMER SERVICE NUMBER AT: (888) 777-8250. WE WILL BE HAPPY TO ASSIST YOU. 2380A-Top 2380D-Divider 4pcs...
- Page 4 Do not tighten screw on the amgle bracket all the way in this step. Leave it a bit loose until you attach part D in the next step. Then you will tighten the screws. CAMLT12 UNLOCKED POSITION Use small hole #4 from the left end.
- Page 5 Press part (D) in the groove of part (E). The holes in part (D) should face away from part (E), except for holes where brackets are attched, and RED marked end of it should be on the same side as on part (E). Make sure part (E) and (D) are aligned with each other on both ends.
- Page 6 CAMBT16 Finished Side DOWW830 TRNTSC TRNTPL...
- Page 7 Lock camlocks on panels E as you install them before you proceed to next one. Otherwise panels may fall over and cause damage. Make sure you have on top only RED marked ends of panels D & E Turn camlocks clockwise using flat (preferred) or phillips scrdriver until full stop(slightly over 1 2 a turn...
- Page 8 Install top first. Next install one shelf in the middle (#6 or #7, depending if you re going to use it for CD or DVD.) on each side to restrict movement of inside dividers D. Do not tap with hammer onto shelf supports, instead twist them when inserting in.