Advantech ARK-1382 User Manual page 6

Chapter 4
4.1
Appendix A
A.1
ARK-1382 User Manual
Full Disassembly
Introduction ............................................................................................. 34
Figure 4.1 Unscrew the 4 screws on the bottom side................ 34
Figure 4.2 Unscrew the 6 screws on the front side frame ......... 35
Figure 4.3 Unscrew the 1 screws on the front face plate .......... 35
Figure 4.4 Unscrew the 4 Hex-bolt on the front face plate ........ 36
Figure 4.5 Unscrew the 6 screws on the rear side frame .......... 36
Figure 4.6 Unscrew the 4 Hex-bolt on the rear face plate ......... 37
Figure 4.7 Unscrew the antenna mounting screw ..................... 37
Figure 4.8 Pull out the carrier board from the Aluminum case on
bottom side, and be careful for the thermal pad....... 38
Figure 4.9 Memory Socket ........................................................ 38
Figure 4.10MiniPCI Socket......................................................... 39
Figure 4.11Jumper Setting ......................................................... 39
Figure 4.12Install the board on the bottom side and be careful for
thermal pad .............................................................. 40
Realtek RTL8111B/8111C Gigabit Boot
Agent Configuration
Realtek RTL8111B/8111C Gigabit Boot Agent Configuration Menu ...... 42
vi
Procedure............ 33
Menu41