Table 2.2: Usb Connector - Advantech ARK-1382 User Manual

Table 2.2: USB Connector

Pin Signal name
1 VCC
3 USB_data+
2.2.1.3 Ethernet Connector (LAN)
ARK-1382 is equipped with an Realtek RTL8111B-GR Ethernet controller that is fully
compliant with IEEE 802.3u 10/100/1000Base-T CSMA/CD standards. The Ethernet
port provides a standard RJ-45 jack connector with LED indicators on the front side
to show its Active/Link status (Green LED) and Speed status (Yellow LED).
Table 2.3: RJ-45 Connector Pin Assignments
Pin
1
2
3
4
5
6
7
8
2.2.1.4 Compact Flash Card
ARK-1382 is equipped with an external CF card. You can find the installation in
Appendix.
2.2.1.5 Power ON/OFF Button
ARK-1382 comes with a Power On/Off button, that support dual function of Soft
Power -On/Off (Instant off or Delay 4 Second), and Suspend.
2.2.1.6 LED Indicators
There are four LEDs on ARK-1382 front metal face plate for indicating system status:
PWR LED is for power status and Flash in green color; and HDD LED is for compact
flash disk status, which Flash in red color; Normal LED is to detect the internal tem-
perature which is under 75° C, which flash in blue color; When the internal tempera-
ture is over 75° C, normal LED will not flash and alarm LED will Flash in orange color,
which means end user have better to enhance air flow condition to dissipate heat.
Advantech QA testing profile is to make sure system is stable under 60° C environ-
ment temperature, chamber air flow rate: 0.7 m/s; To reflect customer's installation
site sometimes will be non air flow condition, over heat LED is to alarm customer that
environment temp is too high, suggest to enhance the air flow rate.
ARK-1382 User Manual
Pin
2
4
Figure 2.5 Ethernet Connector
10/100/1000BaseT Signal Name
TX+
TX-
RX+
NC
NC
RX-
NC
NC
16
Signal name
USB_data-
GND