Program Operation; Teaching-Out Components / Using A Different Central Control Unit - HomeMatic HM-CFG-USB-2 Installation And Operating Manual

7

Program operation

The CD supplied contains a detailed
description of the PC software user interface
(WebUI).
8 Teaching-out components /
Using a different central control
unit
If you want to remove a taught-in HomeMatic component
from the system, pass it on to other users or use
the HomeMatic central control unit instead, all the
HomeMatic components concerned must be taught-out
from the wireless configuration tool USB. For information
about this procedure, refer to the description of the PC
software user interface (WebUI).
If a system security key has been assigned, the taught-
in HomeMatic components must be reset to their initial
state. For information about this procedure, refer to the
description of the PC software user interface (WebUI).
23