Function; General System Information On Homematic; General Information On Radio Operation - HomeMatic HM-LC-Sw1-PI Operating Manual

3

Function

The actuators control connected consumers based on the radio
commands received. Commands are sent out by actuating but-
tons, remote operations or from a software interface. In addition,
it is possible to control actuators with sensors that are taught.
The sensors send (like a button) a command when an event
occurs. More information is provided in the instructions for the
respective sensor.
A Device LED
B Channel button
C Fuse holder (only HM-LC-DimL1-PI)
16
4 General system information on
HomeMatic
This device is a part of the HomeMatic home control system and
works with the bidirectional BidCoS® wireless protocol.
All devices are delivered in a standard configuration. The
functionality of the device can also be configured with a
programming device and software.
Further resulting functionality and the additional functions provi-
ded in the HomeMatic system combined with other components
are described in the separate Configuration Instructions and in
the HomeMatic System Manual.
All current technical documents and updates are provided under
www.HomeMatic.com.
5

General information on radio operation

The radio transmission is on a non-exclusive transmission path
which means that there is a possibility of interference occurring.
Other interfering sources can be caused by switching operations,
electrical motors or defective electrical devices.
The range of transmission within buildings can greatly
deviate from open air distances. Besides the transmitting
power and the reception characteristics of the receiver,
environmental influences such as humidity in the vicinity and
local structures also play an important role.
Hereby eQ-3 Entwicklung GmbH, declares that this device
conforms with the essential requirements and other relevant
regulations of Directive 1999/5/EC.
The full declaration of conformity is provided under
www.HomeMatic.com.
17