Hinweise zu dieser Anleitung Lesen Sie diese Anleitung sorgfältig, bevor Sie Ihre HomeMatic-Komponenten in Betrieb nehmen. Bewahren Sie die Anleitung zum späteren Nachschla- gen auf! Wenn Sie das Gerät anderen Personen zur Nutzung überlassen, übergeben Sie auch diese Bedienungs- anleitung.
Funktion Der Funk-Konfigurationsadapter USB ermöglicht die Konfiguration der Funktionen von bis zu 500 HomeMatic-Komponenten von einem PC aus, ohne eine HomeMatic-Zentrale einsetzen zu müssen. Der Anschluss des Funk-Konfigurationsadapters USB erfolgt über eine USB-Verbindung; die HomeMatic- Komponenten werden über die im HomeMatic-System übliche Funkverbindung erreicht.
Kontrollleuchte Allgemeine Systeminformation zu HomeMatic Dieses Gerät ist Teil des HomeMatic-Haussteuerungs- systems und arbeitet mit dem bidirektionalen BidCoS- Funkprotokoll. Alle technischen Dokumente und Updates finden Sie stets aktuell unter www.HomeMatic.com.
Luftfeuchtigkeit auch bauliche Gegebenheiten vor Ort eine wichtige Rolle. Hiermit erklärt die eQ-3 AG, dass sich dieses Gerät in Übereinstimmung mit den grundlegenden Anforde- rungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Die vollständige Konformitätserklärung finden Sie unter www.HomeMatic.com.
Der PC muss über eine freie USB-Schnittstelle verfügen. 6.2 Installation Legen Sie die mitgelieferte Programm-CD in das optische Laufwerk Ihres PCs. Starten Sie die Programminstallation über das Programm „Setup.exe”. Das Installationsprogramm legt einen Programm- ordner „HomeMatic” an. Starten Sie dort das Programm „HomeMatic- Komponenten konfigurieren”:...
Page 9
Schließen Sie den Funk-Konfigurationsadapter USB an einen USB-Port des PCs an. Sollte dies aus mechanischen Gründen oder aufgrund schlechter Empfangsbedingungen hinter dem PC nicht praktikabel sein, so kann auch das beiliegende USB-Verlängerungskabel verwendet werden. Bitte verwenden Sie ausschließlich das bei- liegende USB-Verlängerungskabel, wenn das Gerät abgesetzt vom PC platziert werden soll.
Page 10
Wählen Sie im Programmmenü „Datei” die Option „Einstellungen” und dort im Fenster „Verbindungsauswahl” die Option „HomeMatic- USB-Interface” an: Wählen Sie im Fenster „Verbindungsauswahl bestätigen” die Option „Fertig stellen” an. Damit ist der Funk-Konfigurationsadapter USB ange- meldet:...
Zentrale Wollen Sie eine angelernte HomeMatic-Komponente aus dem System entfernen, an andere Nutzer weiter- geben oder aber die HomeMatic-Zentrale CCU einset- zen, sind alle betroffenen HomeMatic-Komponenten vom Funk-Konfigurationsadapter USB abzulernen. Lesen Sie dazu die Beschreibung der Bedienoberflä- che (WebUI).
USB kann folgende Zustände anzeigen: • Dauerleuchten: Gerät an USB angeschlossen • Flackern: Kommunikation mit HomeMatic-Gerät 10 Wartung und Reinigung Das Produkt ist wartungsfrei. Überlassen Sie eine Reparatur einer Fachkraft. Reinigen Sie das Pro- dukt mit einem weichen, sauberen, trockenen und fusselfreien Tuch.
11 Technische Daten Schnittstelle: Funkfrequenz: 868,3 MHz Typ. Freifeldreichweite: 100 m Anlernbare Geräte: Spannungsversorgung: (USB powered) Schutzart: IP20 Umgebungstemperatur: +5°C bis +45°C Abmessungen (B x H x T) (ohne Stecker): 28 x 84 x 11,5 mm Gewicht: 18 g Technische Änderungen vorbehalten. Entsorgungshinweis: Gerät nicht im Hausmüll entsorgen! Elektronische Geräte sind entsprechend...
Information about this manual Read this manual carefully before starting to use your HomeMatic components. Keep the manual handy so you can refer to it at a later date! If you hand over the device to other persons for use, please hand over the operating manual as well.
Function The wireless configuration tool USB enables the functions of up to 500 HomeMatic components to be configured from a PC, without having to use a HomeMatic central control unit. The wireless configuration tool USB is connected via...
Status indicator light General system information about HomeMatic This device is part of the HomeMatic home control system and works with the bi-directional BidCoS ® wireless protocol. All current technical documents and updates are provided at www.HomeMatic.com.
AG hereby declares that this device conforms with the essential requirements and other relevant regulations of Directive 1999/5/EC. The full declaration of conformity is provided at www.HomeMatic.com.
USB interface. 6.2 Installation Insert the program CD supplied into your PC’s optical disc drive. Run the “Setup.exe” program to start the installation. The installation program creates a program folder called “HomeMatic”. In this folder, launch the “HomeMatic Komponenten konfigurieren” program.
Page 21
Connect the wireless configuration tool USB to a USB interface on the PC. If a connection behind the PC is not functional for mechanical reasons or due to poor reception conditions, the attached USB extension cable can be used. Please do only use the attached USB extension cable if you want to place the device detached from the PC.
Page 22
In the “Datei” program menu select the “Einstellungen” option, then in the “Verbindungswahl” window choose the “HomeMatic USB interface” option: In the “Verbindungsauswahl bestätigen” window click “Fertig stellen”. The wireless configuration tool USB has now been registered.
Teaching-out components / Using a different central control unit If you want to remove a taught-in HomeMatic component from the system, pass it on to other users or use the HomeMatic central control unit instead, all the HomeMatic components concerned must be taught-out from the wireless configuration tool USB.
USB can represent the following states: • Lit continuously: device connected to USB • Flickering: communicating with the HomeMatic device 10 Maintenance and cleaning The product does not require any maintenance. Enlist the help of an expert to carry out any repairs. Clean the product using a soft, lint-free cloth that is clean and dry.
Technical specifications Interface: Radio frequency: 868.3 MHz Typ. open air range: 100 m Devices that can be taught-in: Power supply: (USB-powered) Degree of protection: IP20 Ambient temperature: +5°C to +45°C Dimensions (W x H x D) (not inc. plug): 28 x 84 x 11,5 mm Weight: 18 g Subject to technical alterations.
Page 28
Bevollmächtigter des Herstellers: Manufacturer’s authorised representative: eQ-3 AG Maiburger Straße 29 26789 Leer / GERMANY www.eQ-3.de...