Alcatel-Lucent 1675 LAMBDAUNITE Reference Manual page 31

ES64U SNMP MIB description
....................................................................................................................................................................................................................................
MIB field name
OpticsIMETSInFlowPolicing Mode
OpticsimETSInFlowCross ConnectIdentifier
OpticsimETSInFlowVLANPop
OpticsimETSInFlowColorProfile Pointer
OpticsimETSInFlowLayer2 ProtocolList
OpticsIMETSInFlowRowStatus
....................................................................................................................................................................................................................................
365-374-201R11.0
Issue 1 July 2008
OpticsIMETSInFlowTable (ETS MIB)
Description
Specifies the type of Inflow.
ETS Policing Mode
Identifier of the pointed
cross-connection
(opticsIMETSCrossConnectTable)
Enable or disabled the VLAN Pop
configuration. This object is
meaningful only if service type is
'Ethernet'.
Read / Write.
Not supported by ISA ES 1/4
Pointer to the related Color Profile
(opticsIMETSColorProfileTable), if
any. This object is meaningful only if
service type is 'Ethernet' and if the
PolicingMode is 'colorAware' or
'disabled'
Read / Write.
Enables to choose if to tunnel toward a
Provider Network, or filter data and
Layer 2 control frames.
Bit=1: Relative frame is tunnelled.
Bit=0: Relative frame is discarded.
Significant only if ServiceType is
'ethernet'.
Read.
ETS Layer MIB
Value
0-unicastNoAutoLearning (default
value)
1 -colorBlind (default value)
2 –disabled (non policed traffic)
Value of
opticsIMETSCrossConnectIndex.
Read-only field. It is initialized
automatically by the NE agent after
the entry in the cross-connect table has
been created
1 – enabled
2 – disabled (default)
Related Color profile index.
0 if no color profile (default)
Default: all bits=1, i.e. tunnelling
everything.
Overview
1-19