Alcatel-Lucent 1675 LAMBDAUNITE Reference Manual page 23

ES64U SNMP MIB description
....................................................................................................................................................................................................................................
OpticsIMEthConfTable (OPTICSIM-ETHNE-MIB)
This media-specific interface table is used to define the proprietary configuration
parameters for the Ethernet interfaces.
Object identifier (OID):
1.3.6.1.4.1.637.54.1.25.2.1.1
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).opticsimEthMib(25).
opticsimEthNEMib(2).opticsimEthNEMibObject(1).opticsIMEthConfTable(1)
MIB field name
ifIndex
opticsIMEthMauIndex
opticsIMEthJackIndex
opticsIMEthConfEncaps
OpticsIMEthAvailableBandwidth
OpticsIMEthConfVLANEtherType
OpticsIMEthClientType
opticsIMEthCirOverbookingFactor
opticsIMEthEirOverbookingFactor
....................................................................................................................................................................................................................................
365-374-201R11.0
Issue 1 July 2008
OpticsIMEthConfTable
Index of the table
Not Used
Not Used
Not Used
(RO)
Indicates the available bandwidth of a
specific port (this value applies to the
value which can be decrease from
opticsIMIfRateLimitedSpeed
Points to an entry in
opticsIMEthVLANTypeTable
represents the EtherType value used to
detect VLAN tagged frames received
from this interface, as well as to
insert VLAN tags to the frames to be
transmitted.
(RW)
Transmission direction of the frames
received from this interface
(RW)
This attribute defines the overbooking
(OB) factor for the CIR bandwidth.
The overbooking factor is defined as a
percentile.
(RW)
Description
)
that
Generic interface MIB
Value
A unique value greater than 0
In kbit/s
Minimum value: 1Mbit/s
Default value: 0 Gbit/s
0 means standard EtherType (0x8100
VLAN Tag) IEEE 802. 1Q
0 is the default value.
1-ets (sent to ETS Layer)
3-linkagg
0 means unlimited
100 means CIR
101 to 10000 means CIR/100 * (the
value)
Values 1 to 99 are not allowed.
Interfaces
1-11