Alcatel-Lucent 1675 LAMBDAUNITE Reference Manual page 22

ES64U SNMP MIB description
....................................................................................................................................................................................................................................
IfXTable (IF-MIB)
A list of interface entries. The number of entries is given by the value of ifNumber.
This table contains additional objects for the
Object identifier (OID):
1.3.6.1.2.1.31.1.1
Full path:
iso(1).org(3).dod(6).internet(1).mgmt(2).mib-(1).ifMIB(31).ifMIBObjects(1).ifXTable(1)
MIB field name
IfPromiscuousMode
OpticsIMIfTable (TSDIM-SNMPNE-MIB)
This table contains interface configuration not defined in the
Object identifier (OID):
1.3.6.1.4.1.637.54.1.1.5.1.19
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).tsdimBasicMib(1).
tsdimSnmpNEMib(5).tsdimSnmpNEMibObject(1).opticsIMIfTable(19)
MIB field name
IfIndex
opticsIMIfRateLimitedSpeed
TsdimIfUnderlieLayer
....................................................................................................................................................................................................................................
1-10
IfXTable (augments ifTable)
Specifies if interface accepts all
packets/frames or not. Set to false
(i.e. non-promiscuous mode, means
that Ethernet frames are terminated),
(read only)
Index of the table
This attribute carries out the rate
limiting functionality.
This attribute is used for the CAC
tests – it is useful only for the
Ethernet interface. The actual
bandwidth is the minimum value
between the Rate Limit and the SDH
current Speed.
(RO) Reference to the underlying path
layer.
IfTable
Description
OpticsIMIfTable
Description
Generic interface MIB
.
Value
1-true (default)
.
IfTable
Value
A unique value greater than 0
In kbit/s
Minimum value: 1Mbit/s
Default value: 0 Gbit/s
1 - SDH/Sonet
365-374-201R11.0
Issue 1 July 2008
Interfaces