Download Print this page

Onset HOBO UX100-014M Manual page 2

Single channel thermocouple data logger

Advertisement

Specifications (continued)
Logger Components and Operation
Start/Stop Button: Press this button for 3 seconds to start or
stop logging data, or to resume logging on the next even
logging interval. This requires configuring the logger in
HOBOware with a push button start or stop, and with "Resume
logging on next button push" selected (see Setting up the
Logger). You can also press this button for 1 second to record
an internal event (see Recording Internal Logger Events) or to
turn the LCD screen on if the option to turn off the LCD has
been enabled (see Setting up the Logger).
Battery Tray: Remove the battery tray on the top of the logger
to access the logger battery (see Battery Information).
Find Quality Products Online at:
Logger (continued)
Download Type
Full Memory Download Time
LCD
Size
Weight
Environmental Rating
Plot A: Internal Temperature Accuracy & Resolution
Battery Tray
Start/Stop Button
Mounting
Loop
LCD Screen
USB Port
GlobalTestSupply
www.
HOBO Single Channel Thermocouple Data Logger (UX100-014M) Manual
USB 2.0 interface
1 minute, 30 seconds
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly
or go blank in temperatures outside this range
3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)
30 g (1.06 oz)
IP50
The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).
Alarm/Stats Button
Internal 10K Thermistor (Temperature)
Mounting
Loop
Thermocouple Port
Alarm/Stats Button: Use this button to clear a tripped alarm
(see Setting up Alarms) or to switch between statistics, alarm
readings, and the current temperature reading.
Internal 10K Thermistor (Temperature): The internal 10K
thermistor (not visible in the diagram) measures ambient
temperature, if the channel is configured to log in HOBOware
(see Setting up the Logger).
Mounting Loops: Use the two mounting loops to mount the
logger with the hook-and-loop strap (see Mounting the Logger).
Thermocouple Port: Use this port to connect the thermocouple
sensor (see Connecting the Thermocouple Sensor).
.com
Plot B: Time Accuracy
sales@GlobalTestSupply.com

Advertisement

loading