Turn on the Rider 50
Press and hold the Power
Acquire Satellite Signals
Once the Rider 50 is turned on, it will automatically search for
satellite signals. It may take 30 to 60 seconds to acquire signals. The
GPS signal icon turns blue when GPS is fixed.
Initial Setup
When turning the Rider 50 on for the first time, the setup wizard
appears on screen. Follow the instructions to complete setup.
1. Select the display language.
2. Select the unit of measurement.
3. Enter your personal information.
4. Read and accept the Safety Agreement.
Ride your Bike with Rider 50!
1. Press the Mode
2. Select from the available different modes: Grid, Map, and My
Buddy.
If the screen is at the Grid mode, use the 5-way navigator to
change the setting.
3. In free cycling, press
pause. Press and hold
10
Getting Started
button to turn the Rider 50 on.
button to switch modes.
to start recording and press it again to
to stop recording.