Dimmer Curve Chart; Power Linking; Troubleshooting - ADJ UV 72IP User Instructions

UC IR Remote & Airstream IR Receiver
UV 72IP
UV 72IP
DIMMER
100%
50%
10%
0%
0 Sec Rise Time
0 sec Fade Time
Dimming Curve
Ramp Effect
0
Rise Time (ms)
Standard (default) 0
Stage 780
TV 1180
Architectural 1380
Theatre 1580
ADJ Products, LLC - www.adj.com - UV 72IP User Manual Page 18

Dimmer Curve Chart

Down Time
1 sec Fade Time
255
0
Down Time (ms) Rise Time (ms) Down Time (ms)
0 0
1100 1540
1520 1860
1730 2040
1940 2230
UV 72IP
With this feature you can connect the fixtures to one another
using a IP rated connector cable (sold separately). The quantity
that can be connected is 14 fixtures maximum @ 120V and 24
fixtures maximum @ 240V. After the maximum amount of fixtures
have been reached you will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES
TO THE UV 72IP AS THE POWER CONSUMPTION OF OTHER
LIGHTING FIXTURES WILL VARY!
UV 72IP
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
UV 72IP
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
Time (ms)
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
255
operates (i.e. smoke, fog residue, dust, dew).
0
1660
1940
2120
2280
ADJ Products, LLC - www.adj.com - UV 72IP User Manual Page 19

Power Linking

Trouble Shooting
Cleaning