jotron Tron 40S MkII User Manual page 7

The information in this book has been carefully checked and is believed to
be accurate. However, no responsibility is assumed for inaccuracies.
This equipment contains CMOS integrated circuits. Observe handling pre-
cautions to avoid static discharges which may damage these devices.
Jotron AS reserves the right to make changes without further notice to any
products or modules described herein to improve reliability, function or de-
sign. Jotron AS does not assume any liability arising out of the application
or use of the described product.
WARNING / IMPORTANT
Jotron AS is a prime manufacturer of safety equipment designed for rescue
of human lives and their property. For safety equipment to be effective in
line with the design parameters it is important that they are handled, stowed
and maintained in compliance with the manufacturers instructions. Jotron
AS can not be held responsible for any damage caused due to incorrect
use of the equipment or breach of laid down procedures or for failure of any
specific component or other parts of the equipment.
The chapter covering battery replacement (6.1.2) is added for information
only. Jotron AS does not take any responsibility for improper disassembling/
assembling of the beacon. We strongly recommend all service to be done
by authorized Jotron AS agents. In addition to normal service, Jotron AS
agents have the necessary equipment and education to test the opera-
tional functions of the beacon. Non-original maintenance and/or service
parts may destroy the equipment function and performance.
82819_UM_40SMkII_H
www.jotron.com
CAUTION!
7