DEVA Broadcast DB9000-RX Installation Manual page 8

*** NOTE: Please note that the device must NOT be connected to the
electrical network during the assembly. Please observe the safety standards.
Step 6:
Use a star blade screwdriver № PH1 to gently unbolt the bolts holding the
motherboard to the metal bottom of DB-9000RX. Picture 8 displays the
position of the bolts.
(For your convenience we have circled them in red.)
Gently remove the motherboard from the device's metal body and place it on a
static surface.
Place the unscrewed bolts near you so that they can be at hand during the
reassembling of DB-9000RX Professional IP Audio Decoder with Stereo and
RDS Encoder Module.
Picture 8
Please do not remove or damage any parts of the motherboard!