DEVA Broadcast DB9000-RX Installation Manual page 11

Professional ip audio decoder with stereo & rds encoder module

Hide thumbs Also See for DB9000-RX:

*** NOTE:

Please note that the device must

NOT

be connected to the

electrical network during the assembly. Please observe the safety standards.

Step 9:

Once the Stereo and RDS Encoder Module is added to DB-9000RX

Professional IP Audio Decoder, the entire unit has to be reassembled

following the steps listed above in a reverse order – from Step 6 to Step 1.

Please observe the safety standards!

Please do not remove or damage any parts of the motherboard!

Before you connect the device to the electrical network, make sure that

the device is closed properly and there are no factory bolts left unused.