DEVA Broadcast DB9000-RX Installation Manual page 13

Professional ip audio decoder with stereo & rds encoder module

Hide thumbs Also See for DB9000-RX:

In this case, following strictly the previously described procedure, remove the

equipment's lid (Steps 1 & 2) and make sure that the MPX board has been

properly installed.

*** NOTE:

Please note that the device must

NOT

be connected to the

electrical network during the assembly/reassembly. Please observe the safety

standards.

After reassembling the unit, connect the device via the WEB interface. If the

message "STEREO ENCODER BOARD IS NOT INSTALLED" appears again,

please contact us at

support@devabroadcast.com