DEVA Broadcast DB9000-RX Installation Manual page 3

*** NOTE: Please note that the device must NOT be connected to the
electrical network during the assembly. Please observe the safety standards.
Step 1:
Place the device on a working table with static surface. The rear part of the
device must be set against you
(Picture 1 represents the proper position for the
device).
Next, using a star blade screwdriver № PH2 unscrew the three bolts that
hold the cover of the device. Picture 1 displays the position of the bolts.
(For
your convenience we have circled them in red.)
Place the unscrewed bolts near you so that they can be at hand during the
reassembling of DB-9000RX Professional IP Audio Decoder with Stereo and
RDS Encoder Module.
Picture 1