DEVA Broadcast DB9000-RX Installation Manual page 4

Professional ip audio decoder with stereo & rds encoder module

Hide thumbs Also See for DB9000-RX:

*** NOTE:

Please note that the device must

NOT

be connected to the

electrical network during the assembly. Please observe the safety standards.

Step 2:

Use a star blade screwdriver № PH2 to unbolt the bolts holding the cover of

the device on its left and right side. Picture 2 and Picture 3 show the position

of the bolts. (For your convenience we have circled them in red.)

Place the unscrewed bolts near you so that they can be at hand during the

reassembling of DB-9000RX Professional IP Audio Decoder with Stereo and

RDS Encoder Module.

Picture 2

Picture 3