DEVA Broadcast DB9000-RX Installation Manual page 10

Professional ip audio decoder with stereo & rds encoder module

Hide thumbs Also See for DB9000-RX:

*** NOTE:

Please note that the device must

NOT

be connected to the

electrical network during the assembly. Please observe the safety standards.

Step 8:

Carefully place the connected motherboards into the device's metal body. The

picture below shows the correct position of the motherboards and the cable

terminals.

Use a star blade screwdriver № PH1 and the additional bolts, included in the

set, to gently screw in the bolts to the metal bottom of the device as shown on

Picture 10.

Picture 10

Please do not remove or damage any parts of the motherboard!