Safety Notes; Information For Those Responsible For The Plant Or System - Siemens SIMOTICS XP 1LA5 Compact Operating Instructions

2

Safety notes

2.1 Information for those responsible for the plant
or system
This electric machine has been designed and built in accordance with the
specifications contained in Directive 2006/95/EC up to April 19, 2016 - and from April
20, 2016 according to Directive 2014/35/EU ("Low-Voltage Directive") and is intended
for use in industrial plants. Please observe the country-specific regulations when
using the electric machine outside the European Community. Follow the local and
industry-specific safety and setup regulations.
The persons responsible for the plant must ensure the following:
● Planning and configuration work and all work carried out on and with the machine
is only to be done by qualified personnel.
● The operating instructions must always be available for all work.
● The technical data as well as the specifications relating to the permissible
installation, connection, ambient and operating conditions are taken into account
at all times.
● The specific setup and safety regulations as well as regulations on the use of
personal protective equipment are observed.
Note
Use the services and support provided by the appropriate Service Center
(Page 145) for planning, installation, commissioning, and servicing work.
You will find safety instructions in the individual sections of this document. Follow the
safety instructions for your own safety, to protect other people and to avoid damage
to property.
Observe the following safety instructions for all activities on and with the machine.
Explosion-protected machines
56100000002002, 01/2016
Safety notes
77