Dc Power Supply Module - GE MDS Master Station Technical Manual

Table 6-2. 6755 AC Power Supply Module Specifications
Supply Type
Input Voltage Range
Output
Line Frequency
Power Consumption
Protection
Ambient Temperature range
be removed from an operating system so long as the input power source to the module
being replaced has been disconnected. Refer to Section 7.4 Replacing Modules for infor-
mation on removal and installation.
in-lbs to insure optimum heat transfer through thermal contact connector on the rear of the
unit.

6.2 DC Power Supply Module

Including: 03-6843A01: +/- 12-36 VDC
03-6844A01: +/- 36-75 VDC
03-6845A01: +/- 125 VDC
MDS 05-6399A01, Rev. E
SMPS AC to DC
100-264 VAC
24 VDC, 4.0A
50-60Hz
120W, Maximum
Integrated thermal protection, short circuit protection,
internal non-serviceable fuse
Full capacity from -30°C to +60°C.
CSA certified operating range -30°C to +39°C.
Master station power supply modules are field replaceable units that can
When installing AC Power Supply modules, torque thumbscrews to 10
Figure 6-2. DC Power Supply Module
MDS™ Master Station 79