Environmental Information - GE MDS Master Station Technical Manual

FCC Part 15 Notice
This Equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in
which case users will be required to correct the interference at their own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received; including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment
Canada, IC ERP Limits
IC SRSP-501, 6.3.2. Limits the ERP to 125W for fixed point-to-point operation. For IC use, the
antenna gain and Transmit power must be set to meet the ERP limit of 125W. This can be ac-
complished by using the appropriate at antenna gain in combination with the RF power settings

Environmental Information

The equipment that you purchased has required the extraction and use of natural resources
for its production. Improper disposal may contaminate the environment and present a
health risk due to hazardous substances contained within. To avoid dissemination of these
substances into our environment, and to diminish the demand on natural resources, we encourage
you to use the appropriate recycling systems for disposal. These systems will reuse or recycle
most of the materials found in this equipment in a sound way. Please contact GE MDS or your
supplier for more information on the proper disposal of this equipment.
MDS 05-6399A01, Rev. E
5. This product was certified for use on a 20A branch circuit for the AC
power option.
6. The AC socket outlet shall be installed near the equipment and shall be
easily accessible.
7. The power supply cord must be disconnected from the appliance inlet
before removing any power supply from the chassis.
8. CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY
CORD. DISCONNECT THE TWO POWER SUPPLY CORDS BE-
FORE SERVICING TO AVOID ELECTRIC SHOCK
9. The equipment chassis shall be permanently grounded though a size six
screw and a star toothed washer.
10. The interior of the equipment is not for operator access.
MDS™ Master Station 7