Performance; Ipv4 / Ipv6; Sd-X/0/0 Interfaces; General - GE MDS Master Station Technical Manual

Performance

Interfaces sdms
Measured RF Power – Read-only indication of the measured RF output power (in dBm).
•
Signal to Noise (SNR) – Read-only indication of the signal-to-noise ratio of the received
•
signal.
RSSI – Read-only indication of the measured received signal strength (in dBm).
•

IPv4 / IPv6

5.10 SD-x/0/0 Interfaces

Configuration for each SD Radio Modules is done via the SDMS interface. Each individual in-
terface provides statistics for serial, IP payload and MAC that could be helpful in a debugging
situation.

General

Interfaces sd-x/0/0
MDS 05-6399A01, Rev. E
Status Performance
Status / General
MDS™ Master Station 73