GE MDS Master Station Technical Manual page 45

Address - Use for creating static IPv4 IP address and removing this interface from the
•
built-in Network Bridge.
Neighbor- Use for creating mappings from IPv4 addresses to link-layer addresses.
•
Filter Input - Use for selecting and applying a firewall filter (from available filters) to
•
incoming traffic on this interface.
Filter Output - Use for selecting and applying a firewall filter (from available filters) to
•
outgoing traffic on this interface.
For more information on packet filtering, refer to "Access Control List (Packet Filtering / Fire-
wall)" in the MDS Orbit MCR Technical Manual (05-6632A01)
Input - Default Selections (others may have been added) :
•
- IN_TRUSTED
- IN_UNTRUSTED
- OUT_TRUSTED
- OUT_UNTRUSTED
Output - Default Selections (others may have been added) :
•
- IN_TRUSTED
- IN_UNTRUSTED
- OUT_TRUSTED
- OUT_UNTRUSTED
See the MDS Orbit MCR Technical Manual (05-6632A01) for information on configuring
NAT.
MDS 05-6399A01, Rev. E MDS™ Master Station 41