Advertisement
CHEVROLET Spectrum 1985-89
GEO Spectrum 1989
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(2) Phillips screws securing the radio trim
bezel to the bottom of the dash and remove
the bezel. Remove (2) screws securing the
factory head unit to the sub-dash and
disconnect the wiring.
3
Using the v-cut as a guide, cut and remove the bottom portion of the Radio Housing. Mount
the converted Brackets to the Housing with (4) #6 Phillips Screws supplied. Skip to the
Installation Instructions for ALL VEHICLES on Page #7.
1
2
"A"
"A"
Cut and remove all mounting tabs on
Brackets Set #2 EXCEPT tabs "A". The
mounting tabs can be identified by the
stamped letter on the back of each tab.
ISUZU I-Mark 1985-91
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(2) Phillips screws from each side of the
dash trim bezel and remove the bezel.
Remove (4) Phillips screws securing the
bracket assembly.
Remove the factory
head unit and disconnect the wiring.
3
Using the v-cut as a guide, cut and remove the bottom portion of the Radio Housing. Mount
the converted Brackets to the Housing with (4) #6 Phillips Screws supplied. Skip to the
Installation Instructions for ALL VEHICLES on Page #7.
2
"A"
"A"
Cut and remove all mounting tabs on
Brackets Set #2 EXCEPT tabs "A". The
mounting tabs can be identified by the
stamped letter on the back of each tab.
6
Advertisement
