Roland Camm-1 CX-24/12 User Manual page 44

9 Display Menu Descriptions
REPLOT |
ROTATE|
SMOOTH.|
Stored in Memory
START
Selection Choices
Description
Stored in Memory
<OFF>
Factry Default
Selection Choices
Description
Stored in Memory
<ON>
Factry Default
Selection Choices
Description
No
START, CLEAR
START
This performs cutting using the data in the replot buffer when the [ENTER]
key is pressed.
CLEAR
This deletes the data in the replot buffer when the [ENTER] key is pressed.
Yes
OFF
ON, OFF
When set to ON, the origin point is set at the lower right of the material, and
the text (or image) is rotated by 90 degrees.
* When rotated, the coordinate axis changes.
The pairs of arrows indicate the positive directions along the X and Y
axis
ROTATE: [ON]
ROTATE: [OFF]
Origin point
Yes
ON
ON, OFF
ON
This cuts smooth curves for circular arcs and the like.
Note that small text and intricate shapes may be cut with rounded corners.
OFF
Choose this if corners become rounded when set to [ON].
44
Origin point