Basic Operation; Installing Blade - Roland Camm-1 CX-24/12 User Manual

4 Basic Operation

4-1 Installing Blade

Do not touch the tip of the blade
with your fingers.
Doing so may result in injury.
NOTICE
Be sure to support the tool mounting screw from below when installing the blade holder.
Cutting quality may become poor if installed without supporting the screw in this way.
1
Insert a pin into the blade holder.
2 Insert a blade into the blade holder.
Loosen the screw shown in the figure.
3
Pin
Blade holder
Blade holder
Blade
Screw
17
4 Basic Operation