Table of Contents
Advertisement
12 Operation
T
22°C
22°C
45°C
45°C
1
19°C
19°C
42°C
42°C
0:30
16:00
T
2
18°C
18°C
40°C
40°C
37°C
37°C
23:00
23:00
A
T
22°C
22°C
45°C
45°C
3
19°C
19°C
18°C
18°C
42°C
42°C
40°C
40°C
37°C
37°C
23:00
0:30
16:00
1
Schedule timer
2
Setback function
3
Both setback function and schedule timer are enabled
A
Setback function
t
Time
T
Temperature setpoint
Room temperature
Leaving water temperature
INFORMATION
Space heating based on temperature setpoint is enabled
by default, so only temperature shifts are possible (no ON/
OFF instruction).
Space cooling
[0‑04] Status
Defines whether the ON/OFF instruction can be used in the
schedule timer for cooling.
This is the same as for space heating [0‑03], but the setback
function is not available.
INFORMATION
Space cooling based on temperature setpoint is enabled
by default, so only temperature shifts are possible (no ON/
OFF instruction).
Quiet mode
See
"To program quiet mode" on
Switch the mode on or off at a scheduled time. Four actions can be
programmed per day. These actions are repeated daily.
Installation and operation manual
32
21°C
21°C
44°C
44°C
19°C
19°C
19°C
19°C
42°C
42°C
42°C
42°C
t
6:30
9:00
t
5:00
5:00
21°C
21°C
44°C
44°C
19°C
19°C
19°C
19°C
42°C
42°C
42°C
42°C
t
5:00
6:30
9:00
page 33.
To program space cooling
5 sec
INFORMATION
Press
to return to previous steps in the programming
procedure without saving modified settings.
1 Press
to enter the programming/consulting mode.
2 Select the operation mode you would like to program using
and
.
Result: The actual mode is blinking.
3 Press
to confirm the selected mode.
Result: The time is blinking.
4 Consult the action(s) using
5 Hold down
for 5 seconds to program the detailed actions.
Result: The first programmed action appears.
6 Select the action number you would like to program or to modify
using
.
7 Set the correct action time using
8 Set the leaving water temperature using
9 Set the room temperature using
10 Select
using
to switch cooling and the remote
controller off.
11 Repeat this procedure to program the other actions.
Result: When all actions have been programmed, make sure
that the display shows the highest action number you would like
to save.
12 Press
for 5 seconds to store the programmed actions.
EWAQ016~064CAW + EWYQ016~064CAW
5 sec
and
.
and
.
and
.
and
.
Packaged air-cooled water chiller
4P489435-1B – 2017.10
- Quick Links:
- Outdoor Unit
- Error Codes: Overview
- Technical Data
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
