Placing A Waypoint (Sonar, Downvision And Sidevision); Placing A Waypoint Realvision 3D - Raymarine AXIOM Advanced Operation Instructions

9.4 Placing a Waypoint (Sonar, DownVision and SideVision)

When you observe something of interest in the Sonar app you can place a waypoint at its location
so that you can find the area again.
1. Select and hold on the point of interest onscreen.
The Context menu is displayed and scrolling is paused, temporarily.
2. Select Add Waypoint from the context menu.
The Sonar image will remain paused for approximately 10 seconds after the Waypoint has been
placed.

Placing a waypoint RealVision 3D

To place a waypoint whilst viewing a RealVision 3D channel follow the steps below.
1. Select and hold a location onscreen.
The Waypoint context menu and Red waypoint marker is displayed:
2. Select Place waypoint to create a waypoint at the marker's location, or
Sonar app
99