Radar Settings; Ais Settings - Raymarine AXIOM Advanced Operation Instructions

To set up the Dangerous target alarm, first adjust the Safe distance to the desired value and then
select a Time to reach safe distance. The alarm will be triggered if a tracked target will reach the
specified Safe distance from your vessel within the time period selected.
You can select whether you want the Dangerous target alarm to track Radar targets, AIS targets or
both.
You can display a Safe distance ring around your vessel in the Radar app using the Show safe
distance control.

Radar settings

When the Radar layer is enabled in the Chart app you can configure the Radar settings from the
Targets menu: Menu > Targets > Radar settings.
Setting
Radar selection
Transmit
Dual range
Channel
Show Radar overlay
Visibility
Palette
Use Radar without heading
data
Range

AIS settings

When the AIS layer is enabled in the Chart app you can configure AIS settings from the Targets
menuMenu > Targets > AIS settings.
Setting
Show AIS targets in chart
Enhanced AIS targets
Show these AIS types
84
Description
When more than 1 Radar
scanner is connected you can
choose which Radar to use for
the Radar layer in the Chart
app.
Start the Radar scanner
transmitting or put it in Standby.
Enables and disables dual
range on compatible Radar
scanners
When Dual range is active, you
can switch between channels.
Enables and disables the Radar
layer in the Chart app.
Determines the visibility
(opacity) of the Radar layer.
Selects the color used for the
Radar layer
Enables use of Radar layer
when Heading data is not
available.
Determines the range used for
the Radar layer.
Description
Enables and disables AIS
targets in the Chart app.
Enables and disables display of
enhanced AIS target icons.
Determines the types of AIS
target displayed in the Chart
app.
Options
List of available Radar scanners
• On
• Off
• On
• Off
• 1
• 2
• On
• Off
• 0% to 100%
• Purple
• Black
• Red
• On
• Off
Radar range values
Options
• On
• Off
• On
• Off
• All
• Dangerous
• Buddies