4.6 Settings
The Settings menu contains important information and settings for your MFD.
The Settings menu is split up into different tabs, the settings available are:
Tab
Options
• View hardware and software information about your MFD.
Getting started
• View cartography details for inserted chart cards.
• Update MFD software
• View the LoU disclaimer (Getting started tab).
• Change the user interface language
• Set boat icon and name.
Boat details
• Configure Minimum safe depth, height and width.
• Configure engines.
• Configure batteries.
• Configure fuel tanks.
Units
• Configure preferred units of measurement.
• Configure Bearing mode.
• Configure variation.
• Configure GNSS system datum.
• Assign a Homescreen page or app to start on power up.
This display
• Select save location for screenshots.
• Configure Axiom Pro user programmable button.
• Pair/unpair with a RMK external keypads.
• Connect to a wireless display.
• Wi-Fi Sharing, pair with a wireless Quantum Radar scanner, configure Wi-Fi
• Perform a Settings or Factory reset.
Autopilot
• Enable/Disable Autopilot control.
• Set autopilot response.
• Access advanced autopilot settings.
Network
• View list of networked MFDs.
• Assign a MFD Data master.
• View software and network details for the MFD you are using.
• Save or Erase diagnostics logs to external storage.
• Set up NMEA 0183 options on an Axiom Pro.
• Assign your preferred data sources.
Selecting display language
You can choose which language you want the MFD to use.
1. Select the Language button from the Getting started tab: Homescreen > Settings > Getting
started.
2. Select your desired language.
Homescreen
settings and set mobile app access.
37