Data Troubleshooting - Raymarine AXIOM Advanced Operation Instructions

15.9 Data troubleshooting

Instrument, engine or other system data is unavailable at all displays
Possible causes
Data is not being received at the display(s).
Data source (e.g. instrument display or engine
interface) is not operating.
Software mismatch between equipment may
prevent communication.
Instrument or other system data is missing from some but not all displays
Possible causes
Network connection problem.
Software mismatch between equipment may
prevent communication.
176
Possible solutions
• Check transmitted data is compatible with
your display. Refer to MFD supported PGN list.
• Check the data bus (e.g. SeaTalk
and connections.
• Check the source of the missing data (e.g.
instrument display or engine interface).
• Check power to the data bus.
• Check the Raymarine website and ensure
all your Raymarine products have the latest
software.
Possible solutions
• Check that all required equipment is
connected to the same network.
• Check correct operation of network switch,
if used.
• Check network cabling is correct and free
from damage.
Check all MFDs are using the same version of
software.
ng ) wiring