Advertisement
Quick Links
E4 Printer Quick-start instruction manual
Step # 1. Loading the Media (Label tape) into the printer.
1. Media roll guides
2. Media core adapters
1. Open the top cover.
2. Place the media roll (4) onto the media spindle (3).
( For media rolls with cores larger than 1-1/2" (40 mm), use the two
core adapters (2) provided )
3. Slide the two media roll guides (1) onto the media spindle, with the
smooth sides facing the media roll.
3. Media spindle
4. Media roll
5. Media holder
6. Media guides
Advertisement
Related Manuals for CAB E4/200
Summary of Contents for CAB E4/200
- Page 1 E4 Printer Quick-start instruction manual Step # 1. Loading the Media (Label tape) into the printer. 1. Media roll guides 3. Media spindle 5. Media holder 2. Media core adapters 4. Media roll 6. Media guides 1. Open the top cover. 2.
- Page 2 4. Place the media spindle with the media roll into the media holder slots (5) in the printer. ( The media must unroll with the adhesive side down) 5. Position the media in the center of the media spindle and slide the media roll guides (1) up against the media roll.
-
Page 3: Step # 2. Positioning The Media Sensor
Step # 2. positioning the media sensor 1. Media sensor 3. Media 2. Media sensor cover 4. Gaps between labels 1. Position the media sensor (1) by sliding it left or right until the sensor is in alignment with the gaps in the label tape (4). ( The sensor can be positioned to detect the gaps along the edges of the media (A) or in the center of the media (B). - Page 4 Step # 3. Loading the transfer (ink) ribbon 1. Ink ribbon spindle 4. Ribbon supply holder 2. Ink ribbon 5. Ribbon rewind holder 3. Empty ink ribbon core 1. Slide the ink ribbon (2) onto one of the ink ribbon spindles (1) exactly as shown in Fig (A).
- Page 5 4. Install the ink ribbon spindle with the empty ink ribbon core into the ribbon rewind holder (5) in the printer, exactly as shown in Fig (D). 5. Pull the ink ribbon around the printhead module and attach the end of the ink ribbon onto the empty ink ribbon core as shown in Fig (D).
-
Page 6: Step # 4. Calibrating The Media Sensor
Step # 4. Calibrating the media sensor Calibrating the printer is Required when installing label tape for the first time or when changing label tape to a different size. Calibration is Recommended when changing label tape and/or ink ribbons to maintain correct label alignment. To Calibrate the printer: 1.