Installation information
Selecting dowels
IMPORTANT! Depending on the surface, different mounting materials may be required for
and screws
installing the wall bracket. These mounting materials are not part of the scope of delivery
for the inverter. The installer is responsible for selecting the proper mounting materials.
Screw Recom-
To install the inverter, the manufacturer recommends using steel or aluminum screws with
mendation
a diameter of 0.2–0.3 in. (6–8 mm).
Attaching the
Wall Bracket
10
NOTE! When attaching the wall bracket to the wall or a pillar, make sure that the
wall bracket is not warped or deformed.