AEG BE2003021 User Manual page 19

Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Always hold the halogen lamp
with a cloth to prevent grease
residue from burning on the
lamp.
1. Turn the glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with an
applicable 300 °C heat-resistant
oven light bulb.
Removing the oven door and the glass panel
Use the same oven lamp type.
4. Install the glass cover.
10.5 Cleaning the oven door
The oven door has three panels of glass.
You can remove the oven door and the
internal glass panels to clean them.
CAUTION!
Do not use the appliance without
the glass panels.
The oven door can close if you
try to remove the glass panels
before you remove the oven
door.
1. Open the door fully and hold the
two door hinges.
2. Lift and turn the levers on the two
hinges.
ENGLISH
19