Table of Contents
Advertisement
Antenna Alignment Tool
In order to lift efficiency of antenna aligning, JetWave 2800 series provide a software alignment
tool helping the installers to align and check the antenna directions.
Antenna Alignment Tool will require triggering the function both access point and wireless station
(AP Client) side. It means that both access point and wireless station (AP Client) side should be
the JetWave 2800 series product, otherwise, the function doesn't get properly use.
Choose the SSID which you are going to do the antenna aligning and click the Start button both
access point and wireless station (AP Client) side to start the antenna alignment. You will able to
see the RSSI changes in figure. Try to adjust the directional antenna's horizontal and vertical
angle to get the best RSSI level.
Link Test
A Link Test is additional tool base on Antenna Alignment Tool active status. When you start the
Antenna Alignment Tool, you may set a target throughput to active the Link Test to estimate the
packet error rate.
Choose a target throughput and test duration than click Start Test button. System will generate a
test data transmission to calculate the packet error rate.
Chapter 5 Management
Figure 25 Antenna Alignment Tool
Page 40
Advertisement
Table of Contents
