KT5500 5-
" T
& CLInCHER® B
1
/
ong
2
5.
Pinion
Apply grease to the pinion bearings through the grease fittings located on the bearing caps on the top and bottom faces of the
tong (two locations top, two locations bottom).
6.
Clutch Bearings
Apply grease to the clutch bearings through the two grease fittings located on the clutch bearing cap on the bottom face of the
tong, and the single grease fitting recessed into the end of the clutch shaft. (three locations total).
3.4
S
C
ECTIon
aCKup
T
onTEnTS
ECHnICaL
M
anuaL
M
aInTEnanCE