Rotary Idlers; Pinion Idler - Farr KT5500 Technical Manual

M
aInTEnanCE
3.

Rotary Idlers

Apply grease to the rotary idler bearings through the grease fittings recessed into the top of each shaft on the top face of the
tong (two locations total).
4.

Pinion Idler

Apply grease to the pinion idler bearing through the grease fitting recessed into the top of the half-shaft, located on the bottom
face of the tong (one location only).
KT5500 5-
1
/
T M
ECHnICaL anuaL
" T & CLInCHER® B
ong
2
S C
ECTIon onTEnTS
aCKup
3.3