Model Code; Applications - Farr KT5500 Technical Manual

H M I
yDRauLIC oToR nfoRMaTIon

Model Code

M015 - 61/62
M015 - 61 = 015 Single Speed
M015 - 62 = 015 Two Speed
Options:
62 = Two Speed Single Pilot
Open During Crossover
63 = Two Speed Single Pilot
Closed During Crossover
65 = Two Speed Double Pilot
Open During Crossover
67 = Two Speed Double Pilot
Closed During Crossover

Applications

For durable hydraulic motors that meet your demands, specify Rineer.
For over 35 years, we have specialized in only one thing - engineering the right motor for your needs.
Rineer delivers the performance you can count on .
Limited Warranty Policy
Rineer Hydraulics, Inc. warrants that, at the time of shipment to
Purchaser, our product will be free of defects in the material and
workmanship. The above warranty is LIMITED to defective
products returned by Purchaser to Rineer Hydraulics, Inc., freight
prepaid within four hundred and fifty-five (455) days from date of
shipment, or one (1) year from date of first use, whichever expires
first. We will repair or replace any product or part thereof which is
proved to be defective in workmanship or material. There is no
other warranty, expressed or implied, and in no event shall Rineer
Hydraulics, Inc. be liable for consequential or special damages.
Dismantling the product, operation of the product beyond the
published capabilities or for purposes other than that for which the
product was designed, shall void this warranty.
-1S -015 -31
006 = 6 in
007 = 7 in
008 = 8 in
1S = Std.
009 = 9.5 in
1H = High Speed
331 Breesport San Antonio, Texas 78216
210-341-6333 Fax: 210-341-1231 e-mail: sales@rineer.com
KT5500 5-
1
/
-B1 -TV -000
Seal - Package Selection
Bearing Package Selection
3
3 (98cc)/rev. 010 = 10.5 in
3
3 011 = 11.5 in
(115cc)/rev.
3 3
(131cc)/rev. 013 = 13 in (213cc)/rev.
3 3
(156cc)/rev. 015 = 15 in (246cc)/rev.
T M
ECHnICaL anuaL
" T & CLInCHER® B
ong
2
Special Code Designator
30 = Keyed Shaft
31 = Splined Shaft
32 = Wheel Motor
(172cc)/rev.
34 = Double Key
(189cc)/rev.
50 = Retractable
53 = API Thread
S C
ECTIon onTEnTS
aCKup
7.7