Tong Jaw Availability And Installation; Standard Jaw Die Kits - Farr KT5500 Technical Manual

KT5500 5- " T & CLInCHER® B
1
/
ong
2
These hose couplings are self-sealing, and care should be taken to ensure complete engagement to prevent partial closure of the
check valve in the coupling. Ensure that the nut (female) side is completely made up onto the male connector - there is a line on the
male fitting that indicates complete make-up. Snug the female fitting right up to the line.
E. TONG JAW AVAILABILITY & INSTALLATION
1. Jaw Availability
The following table lists all jaw die kits that are available as standard stocked sizes for this model of tong. McCoy Drilling &
Completions | Farr offers a good selection of standard jaw sizes. However, please note that we can custom-engineer and
manufacture any size of jaw within the range of the tong. Jaw systems are available to allow use of die inserts intended for
specialized applications. Call our sales office for information on jaw and die systems designed for higher or lower grip, or non-
marking applications.
The table lists standard contoured, flat and wraparound die inserts that are available as spare parts. However, a wide variety
of diamond-tooth, GRITFACE®, aluminium, and wrap-around fine-tooth dies are available for specialized applications. Please
refer to our website for complete information:
2 - 3/8" Jaw Die Kit
2 - 7/8" Jaw Die Kit
3" Jaw Die Kit
3 - 1/2" Jaw Die Kit
4" Jaw Die Kit
4 - 1/2" Jaw Die Kit
5" Jaw Die Kit
5 - 1/2" Jaw Die Kit
(1)
(2)
(3)
(4)
All other Standard Die Kits use 1-1/4" x 3.875" Flat Die
2.12
S C
ECTIon
aCKup
http://www.mccoyglobal.com/index.php/dies-inserts
STANDARD JAW DIE KITS (Inserts Not Included)
Description
(1)
(2)
(3)
(4)
Uses 2.375" Contour Die
Uses 2.875" Contour Die
Uses 3.5" Contour Die
Uses 1" x 3.875" Flat Die
Continued On Next Page
T
onTEnTS ECHnICaL
Make up female fitting to
Marked point on male fitting
1064-JDK-65
1064-JDK-70
1064-JDK-71
1064-JDK-75
1064-JDK-80
1064-JDK-85
1064-JDK-90
1064-JDK-95
12-1004
12-1007
12-1011
12-1003
13-0008-314-0
M
anuaL
S
ETup
Part Number
& o
pERaTIon