Farr KT5500 Technical Manual page 122

KT5500 5- " T & CLInCHER® B
1
/
ong
2
BASIC TORQUE MEASUREMENT (Continued:)
The images on the preceding page are for illustration purposes only and may not accurately represent the torque gauge and load cell
that have been supplied with your equipment. Please note that the parts listed in the following table are correct for accurate torque
measurement while using the equipment for which this manual is supplied.
THE TORQUE GAUGE USED IS FULLY DEPENDANT UPON THE ARM LENGTH AND TORQUE
RANGE OF THE EQUIPMENT IN USE. THE PART NUMBERS LISTED IN THE FOLLOWING TABLES
ARE CORRECT FOR ACCURATELY MEASURING TORQUE USING THE EQUIPMENT FOR WHICH
THIS MANUAL IS SUPPLIED.
Item Type
Assembly
Part
A
B Part
Part
C
Item Type
Assembly
Part
A
B Part
Part
C
6.2
S C
ECTIon
aCKup
30" Arm-20K Tension Load Cell and Gauge
2
4.08 in Tension Load Cell
Torque Gauge, 20,000 Ft.-Lbs. 36" Arm
Hydraulic Hose
32" Arm-20K Compression Load Cell and Gauge
8 in 2 Compression Load Cell c/w hoses & fittings
Torque Gauge, 20,000 Ft.-Lbs., 32" Arm
Hydraulic Hose
T
onTEnTS ECHnICaL
Description
Description
M
anuaL
T M
oRquE EaSuREMEnT
Qty Part #
1 10-0028T
1 10-0008T
1 10-0028G
1 02-0069
Qty Part #
1 10-0029C
1 10-0008C
1 10-0029G
1 02-0069