Chrysler 2008 Town & Country Owner's Manual page 477

476 MAINTAINING YOUR VEHICLE
1 — Stop, Tail, Turn Signal bulb combo
2 — Backup Bulb
3. Remove the socket by rotating counter clockwise.
4. Pull the bulb to remove it from the socket.
5. Replace the bulb, reinstall the socket, and reattach the
light assembly.
Center High Mounted Stop Light (CHMSL)
The CHMSL uses LED lights and is not serviceable. The
CHMSL must be replaced as an assembly.
License Light
There are two license plate lights — both located under
the tailgate light bar and above the license plate.
After determining which light is out, follow the steps
below:
1. Remove the two lens assembly mounting screws.
2. Pull the bulb out of the socket. Replace the bulb and
reattach the lens assembly.