To Lock The Doors And Liftgate; Using The Panic Alarm - Chrysler 2008 Town & Country Owner's Manual

Hide thumbs Also See for 2008 Town & Country:
Table of Contents

Advertisement

The Remote Key Unlock feature can be reactivated by
repeating the above mentioned procedure or by perform-
ing the procedure in the Electronic Vehicle Information
Center (EVIC), Customer Programmable Features section
on vehicles so equipped.

To lock the doors and liftgate:

Press and release the LOCK button on the transmitter to
lock all doors and liftgate. The horn will chirp once to
acknowledge the signal.
Sound Horn with Remote Key Lock
This feature will cause the horn to chirp when the doors
are locked with the transmitter.
If desired, the Sound Horn with Remote Key Lock feature
can be turned on and off by performing the following
procedure:
1. Press the LOCK button for 5 to 10 seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
2. While the LOCK button is pressed (after 5 seconds),
press the PANIC button. Release both buttons.
The Sound Horn with Remote Key Lock feature can be
reactivated by repeating this procedure or by performing
the procedure in the Electronic Vehicle Information Cen-
ter (EVIC), Customer Programmable Features section on
vehicles so equipped.

Using The Panic Alarm:

To turn the panic alarm feature ON or OFF, press and
hold the PANIC button on the transmitter for at least one
second and release. When the panic alarm is on, the
headlights and park lights will flash, the horn will pulse
on and off and the interior lights will turn on.
The panic alarm will stay on for 3 minutes unless you
turn it off by pressing the PANIC button a second time or
by turning the ignition switch to the ON position.
2

Advertisement

Table of Contents
loading

Table of Contents