Compass Display - Chrysler 2008 Town & Country Owner's Manual

To Reset The Display
Reset will only occur while a resettable function is being
displayed. Press and release the RESET button once to
clear the resettable function being displayed. To reset all
resettable functions, press and release the RESET button
a second time within 3 seconds of resetting the currently
displayed function (Reset ALL will display during this 3
second window).

Compass Display

The compass readings indicate the direction
the vehicle is facing. Press and release the
compass button to display one of eight com-
pass readings and the outside temperature.
Automatic Compass Calibration
This compass is self-calibrating, which eliminates the
need to manually reset the compass. When the vehicle is
new, the compass may appear erratic and the EVIC will
display "CAL" until the compass is calibrated. You may
UNDERSTANDING YOUR INSTRUMENT PANEL 247
also calibrate the compass by completing one or more
360° turns (in an area free from large metal or metallic
objects) until the "CAL" indicator displayed in the EVIC
turns off. The compass will now function normally.
Manual Compass Calibration
If the compass appears erratic and the "CAL" indicator
does not appear in the EVIC display, you must put the
compass into the Calibration Mode manually as follows:
1. Turn on the ignition switch.
2. Press the MENU button until Personal Settings (Cus-
tomer Programmable Features) menu is reached.
3. Press the STEP button until "Calibrate Compass" is
displayed in the EVIC.
4. Press and release the RESET button to start the cali-
bration. The "CAL" indicator will be displayed in the
EVIC.
4