Chrysler 2008 Town & Country Owner's Manual page 412

WHAT TO DO IN EMERGENCIES 411
5. There are two jack engagement locations on each side
of the body. These locations are on the sill flange of the
body and consist of a pair of down-standing tabs. The
jack is to be located, engaging the flange, between the
pair of tabs closest to the wheel to be changed. Place the
wrench on the jack screw and turn to the right until the
jack head is properly engaged in the described location.
Do not raise the vehicle until you are sure the jack is
securely engaged.
6
Squeezing Winch Retainer Tabs